1. |
Gate 1 or Gate 2 will not operate - Single gate installation |
2. |
Gate 1 or Gate 2 will not operate - Dual gate installation
NOTE: Gate 2 is defined as the gate on the other side of the drive from the control box. |
3. |
Gate 1 AND Gate 2 will not operate - Dual gate installation |
4. |
Single or Dual gate installation opens or closes very slow |
5. |
Single or Dual Gate installation will not automatically close |
6. |
Single or Dual gate installation automatically opens instead of automatically closing |
7. |
Gate begins to open or close, but stops and reverses after a couple of seconds. |
8. |
Pressing the "RESET" button only causes the gate to operate (open, close and stop)
acts like a transmitter. |
9. |
Transmitter (remote control) will not operate the gate |
10. |
Photo eye or other safety accessory will not reverse the gate when closing |
11. |
Transmitter operating range seems short |
12. |
Gate 1 or Gate 2 stop position has changed |
13. |
Gate 1 or Gate 2 will only operate in one direction |
